QMOD Rack Kits

Drawings | RK1 | RK2 | RK2EZ

RK1 - Single Rack Kit

QMOD rk

Mounts one QMOD into one 19" rack space.

Size Long Bracket: 9.5" [206mm] W x 1.75" [38mm] H (1RU) x 1.75” [38mm] D
Size Short Bracket: 1.0" [22mm] W x 1.75" [38mm] H (1RU) x 1.75” [38mm] D
Weight: 3.25 oz [0.148kg]
Enclosure: All aluminum with durable black powder coat paint
Hardware: Qty 4 CS, Phillip, Flathead, 82deg, Black, 8-32 x .25”

Attach the long and short rack ears to the side and towards the front of the unit with the four (4) supplied 8-32 by ¼” (black) countersunk screws.

RK2EZ - Dual Rack Kit for QMOD Modulators

rk2ez

This rack system eliminates the need to remove the covers, each QMOD can be installed and removed without
disturbing the other.

Two brackets are included, heaver steel, long tab mounts to back of QMOD
Attach one bracket on the left side of the left QMOD, 2 screws in front, one at the back
Attach one bracket on the right side of the right QMOD, 2 screws in front, one at the back
Mount the 2 QMODs in the rack individually, side by side

RK2 - Dual Rack Kit

Mounts two QMOD units into one 19" rack space.

Remove top cover of the first unit by removing the ten (10) black screws.
Attach cover of first unit to the side of the second with three (3) supplied 4-40 by 1/4" (silver colored) pan head screws and split lock washers. Note that only one side of the second unit has the (3) built in nuts to accept the screws above.
Reinstall the bottom/chassis of the first unit underneath its cover and attach with just eight (8) of the screws removed in step 1.
Attach short rack ears to the side and towards the front of each unit with the four (4) supplied 8-32 by 1/4" (black) countersunk screws.

Construction: All aluminum with durable black powder coat paint
Includes: 2 short mounting brackets
3 1/4" (silver colored) pan head screws and split lock washers
4 Phillips screws, flathead, 82° Countersink, Black, 8-32 x .375"