HD2-RC IR Remote

Specifications

Physical

Size: 2.05" [52mm] wide x 6.75" [171mm] height x 0.88" [22 mm] deep
Weight: 4.5 oz [127g]
IR Transmission: Transmits using high-frequency (57 KHz) or low-frequency (38 KHz) carrier
Sends one of five IR code sets stored in non-volatile memory
Carrier and codes depends on IR code library selected (see IR Code Programming below)
Status LED: Red LED indicates IR code transmission, battery status
Program Port: Inside battery compartment, allows factory upgrade of firmware
Memory: Non-volatile, will not lose programming when batteries fail or are replaced
Performance: High-output IR LED assures reliable performance within a 35-foot range
Gold switch contacts on circuit board assure reliable, long-term operation

Includes

4 AAA alkaline batteries
Pre-defined panel graphics and labeling

Options

IR-RXC External IR Receiver, senses IR at 57 KHz (default) or 38 KHz, can be positioned for optimal IR reception, available for many iC-series controllers and tuners.

© 2012 Contemporary Research Corporation.
Contemporary Research® is a registered trademark of Contemporary Research Corporation. All rights reserved.