HD-RC IR Remote

Installation

IR Code Programming

The HD2-RC sends high (232-ATSC+) or low-frequency (232-MCT) Contemporary Research IR codes.

To change the IR code format, just press and hold the Select button and the numeric key below, then release the buttons together For example, to select low-frequency CR code transmission, hold down Select and the 4 key.

4 = Contemporary Research - 38 KHz
9 = Contemporary Research - 57 KHz (default)

The 232-ATSC+ receives high-frequency IR, and the 232-MCT recieves low-frequency codes. Make sure IR settings on controller and external receiver match the IR Code format settings on the IR-RC remote.

© 2012 Contemporary Research Corporation.
Contemporary Research® is a registered trademark of Contemporary Research Corporation. All rights reserved.