ICC1-IR IR Display Controller

Application: Integrate IR (InfraRed) controlled displays that include onboard TV tuner

The ICC1-IR IR TV Controller delivers economical 1-way control for display power, volume, and channels, receiving iCC-Net network commands over the same broadband coax that carries the CATV channels. Compact in size and price, the ICC1-IR features sensed power on/off control and intelligent tuning from a channel list stored in onboard non-volatile memory.

High-speed 1-way control is possible through the same RF cable that carries the TV channels, creating networked operation of distributed media systems without adding control wiring. Compatible with ABC-Net Media Networks and iC Commander software, the ICC1-IR can be networked with up to 4000 TV and Video Display controllers. For custom systems applications, all ICC1-IR units and other CR devices can be accessed from a single RS-232 port on an ICC-HE Head-End or Ethernet port on an ICE-HE Ethernet Head End.

Applications include media distribution and control for educational television systems, theme parks, museums, government facilities, arenas, convention centers, airports and corporate video networks

• New! The S2 switches can be used to test IR control operation for power on and off. See page 5 in the ICC1-IR manual. Simplifies testing when installing displays.
• Controls most brands of IR-controlled TVs, LCD and Plasma displays
  • Manages channel access by changing the TV's internal available channel list
  • Delivers absolute power control with included CC-HSD scan frequency sensor
  • Offers discrete power on and off commands for selected models of LCD and Plasma displays
• Receives 1-way individual and zone commands from a single RS-232 port on the ICE-HE
• Provides LED feedback for network, IR control, and power status
• Restores all power and channel status after loss of power from data stored in non-volatile memory
• Mounts on the back of the TV for simplified control and RF installation
• Operates using iC Commander software, as well as from RS-232 protocol from a custom-programmed PC or control system
• Includes CC-HSD Scan Sensor (if required), CC-IRE IR Emitter, RF loop cable, mounting Velcro, and 12VDC power supply
• New! The S2 switches can be used to test IR control operation for power on and off. See page 5 in the ICC1-IR manual.

© 2010 Contemporary Research Corporation.
Contemporary Research® is a registered trademark of Contemporary Research Corporation. All rights reserved.