[

ICC1-232 Display Controller

]

Specifications

Physical

Size: 5.5" [140mm] wide x 1.1" [28mm] high x 3.4" [86mm] deep
Weight: 8 oz [226g]
Enclosure: All aluminum with durable black powder coat paint
Mounting: Mounts rear of display

Front Panel

RF In: 'F', female, 75 ohm impedance, RF from CATV system, iCC-Net control
RF Out: ‘F', female, 75 ohm impedance, RF to TV
Low-loss internal tap - less than -1.5 dbmV loss
Net LED: Green LED for iC-Net bus and DC power, flashes once per second if active
RS-232: DB-9 male connector, baud rates from 1200 to 115,000 baud
Optional CC-232 RS-232 available to match specific makes and models
Tx LED: Red LED lights when RS-232 information is sent
Rx LED Yellow LED lights when RS-232 information is received
Power In: 2.1mm coaxial jack (inside center conductor positive), 75 mA maximum
11.5 to 16.5 VDC, 12 VDC typical (may be unregulated)
DIP Switches: Located on bottom of unit, sets RS-232 code operation and device number

ICC-Net

Operation: 1-way control, carried over the same RF coax connection as TV channels
Data Receive: Mid-band VHF, 74.7MHz, sent from IC Head-End Network Controller , -25 to +35 dBmV signal level

Includes

18" RF Loop cable

Space-saving 12 VDC 500 mA digital switching power supply (North American shipments only)
Mounting Velcro for unit

Options

CC-232 RS-232 Control Cable (specify make, model, and length)